You Searched For: NS Joint Sleeves and Connectors

Inert NS joint sleeves and connectors join laboratory pieces using different methods to allow the transference of even harsh gases and liquids. While sleeves are often used for straight horizontal or vertical joining, L-shaped connectors offer more positioning flexibility. Without needing routine greasing, the lack of residue will leave tests uncontaminated. Both NS joint sleeves and connectors feature sealing rings that provide the most secure fit available.

Inert NS joint sleeves and connectors join laboratory pieces using different methods to allow the transference of even harsh gases and liquids. While sleeves are often used for straight horizontal or vertical joining, L-shaped connectors offer more positioning flexibility. Without needing routine greasing, the lack of residue will leave tests uncontaminated. Both NS joint sleeves and connectors feature sealing rings that provide the most secure fit available.


15  results were found

SearchResultCount:"15"

Sort Results

List View Easy View

Rate These Search Results

Supplier: VWR Collection
Description: PTFE, 0,05 mm thick.

Supplier: VWR Collection
Description: PTFE, with grip.

Supplier: Bohlender
Description: Reusable sleevesmade of PTFE, with gripping ring and sealing rings on the outside.

Supplier: Bohlender
Description: Spherical ground joint sleeves, made of PTFE, with gripping rings and sealing rings on the outside; seal suitable for high vacuums. Robust design for ...

Supplier: Bohlender
Description: PTFE.

Supplier: COWIE
Description: Made of PTFE, grease-free, high vacuum full length rigid sleeves for standard glass joints, with substantial shoulder for ease of handling and repeate...

Supplier: COWIE
Description: Thin wall joint sleeves, made of PFTE, are inserted between standard taper ground glass joints to eliminate the use of grease and prevent sticking.

Supplier: SciLabware
Description: Tapered sleeves, made of PTFE, for grease free and high vacuum seals using ground glass joints.

Supplier: SciLabware
Description: Sleeves, PTFE, for conical ground joints.

Supplier: KARTELL
Description: PTFE.

Supplier: GLASWARENFABRIK KARL HECHT
Description: Disposable sleeves for ground joints and stoppers, prevent the ground joints from sticking together.

Catalog Number: (BRND51422)
Supplier: Brand
Description: PTFE, 0,05 mm thick.
UOM: 1 * 10 items


Supplier: Lenz Laborglas GmbH & CO.KG
Description: Sleeves, made of PTFE. For fitting onto standard ground cones.

Supplier: Lenz Laborglas GmbH & CO.KG
Description: Disposable ground joint sleeves. thin walled, made of PTFE.

Catalog Number: (SEMA0614)
Supplier: SEMADENI
Description: Made of PTFE, white.
UOM: 1 * 1 items


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on 0800 22 33 44
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
Additional Documentation may be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Product(s) marked with this symbol are discontinued - sold till end of stock. Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44.
1 - 15 of 15
no targeter for Bottom